New seat & seat height adjuster, electronics faux 'oil tank', mid-controls, wiring, carbs & air cleaners, permanent magnet alternator installed, side case on, triple trees painted fork tube boots, (not pictured - rear brake pedal).
Here is the wiring diagram that gives me the simplest form of wiring. I adapted this one from others I have seen, there are a few slight modifications I will still make:
  • USB Charging Port will go to a wiring block so that I can run a few items off of a relay like the USB plug, RFID reader/ignition, ans anything else I need.
Feel free to comment on it, pick it apart or tell me needs to change. Click HERE to download it!

Also, here is a list of the electrical parts I used:
  • 1 - 4-6 bay fuse block
  • 1 - 20 amp fuse
  • 3 - 10 amp fuse
  • 1 - 7.5 amp fuse
  • 1 - Ignition switch (I used standard Toggle Switch)
  • 1 - Headlight switch, on-off
  • 1 - High/low switch, on-off-on for hi-off-lo
  • 1 - Brake switch
  • 1 - Kill switch push button (I used standard Toggle Switch)
  • 3' of green, black, & red wire 16 gauge
  • Shrink wrap to match wire color (red & black)
  • Assorted ring terminals
The new 'Oil Bag' that will be my electronics box. I have brass end caps that will finish it off perfectly.
Another angle of the mounted Oil Bag.
Some simple crimping, soldering, and shrink wrapping in action. I took this picture with my teeth...
Electronics shelf with RFID Wireless starter and fuse panel mounted. A few switches installed, basic wiring coming together.
Better view of previous picture, all the leads in place to the switches.

contact me
meet me